Download Print this page

Installation - Oriental motor EZS Series Operating Manual

Motorized linear slide
Hide thumbs Also See for EZS Series:

Advertisement

5

Installation

5-1
Location for installation
The motorized linear slide is designed and manufactured to be incorporated in equipment. Install it in a well-
ventilated location that provides easy access for inspection. The location must also satisfy the following conditions:
• Inside an enclosure that is installed indoors (provide vent holes)
• Operating ambient temperature: 0 to +40 °C [+32 to 104 °F] (non-freezing)
• Operating ambient humidity: 85 % or less (non-condensing)
• Area free of explosive atmosphere, or toxic gas (such as sulfuric gas), or liquid
• Area not exposed to direct sun
• Area free of excessive amount of dust, iron particles or the like
• Area not subject to splashing water (rain, water droplets), oil (oil droplets) or other liquids
• Area free of excessive salt
• Area not subject to continuous vibrations or excessive shocks
• Area free of excessive electromagnetic noise (from welders, power machinery, etc.)
• Area free of radioactive materials, magnetic fields or vacuum
• Up to 1000 m (3300 ft.) above sea level
„ If a motorized linear slide is installed in an environment where a magnetic field is
generated
A magnetic sensor is built into the encoder (ABZO sensor). If the motorized linear slide is installed close to equipment
which generates a strong magnetic field, the encoder (ABZO sensor) may break or malfunction. Make sure to prevent
the magnetic flux density on the surface of the encoder (ABZO sensor) from exceeding 10 mT.
Do not install the motorized linear slide close to equipment which generates a strong magnetic field.
5-2
Installing the motorized linear slide
The EZS Series is available for horizontal installation, vertical installation, and wall-mount installation.
Taking account of vibration prevention as well as deflection of the motorized linear slide, install it on a metal surface
of sufficient strength (thickness 10 mm or more). Secure so that the entire area of the bottom face of the motorized
linear slide contacts the mounting plate.
„ Installation procedure
Use the positioning pin holes and the positioning pins to position the motorized linear slide. (
1
Use the guide rail reference surfaces and the mounting reference surfaces of the motorized linear slide to
position.
2
Secure the motorized linear slide from the upper side with the included bolts for mounting. (
Secure the motorized linear slide from the back side of the mounting plate with screws (not included).
3
_
(
p.17)
Installation
_
p.16)
_
p.17)
13

Advertisement

loading