1
Power Up Check Point 1100 Appliance
•
Connect the power cable to the power port on the 1100 Appliance rear panel.
Plug the power supply unit into a power outlet.
•
The Power LED on the front panel will light, indicating that the appliance is
turned on.
•
The Notice LED on the front panel will start blinking, indicating the appliance is
booting up. When the Notice LED is turned off, the appliance is ready for login.
2
Connect Your Check Point 1100 Appliance
to the Internet
•
Connect the included Ethernet cable to the WAN port on the 1100 appliance rear
panel and plug it into your external modem or router's PC/LAN network port.
•
The WAN Link LED on the front panel will light when connection
is established.
Need help?
Do you have a question about the 1100 and is the answer not in the manual?