WMF 1120 Series User Manual page 92

Care | Manual cleaning
™ Thoroughly wipe out hopper with a damp cloth
™ Clean the individual parts of the dosing auger
thoroughly, using the included cleaning brush
™ Allow powder hopper and individual components
to dry completely
™ Re-assemble and replace the dosing auger and
screw on union nuts
Make sure the discharge cap is in the
right place.
™ Fill the powder hopper and replace the cover
™ Close the lock
Powder hopper extension (optional)
™ Unlatch the extension
™ Lift up the extension to remove it
™ Wipe out the extension thoroughly with a damp
cloth and allow to dry
™ Replace the extension and latch it in place
92
Portion controller with individual
parts. Dosing auger
IMPORTANT
Optional equipment:
Double powder portioner
with individual parts.
User Manual WMF 1100 S