3. Transfer data to your computer
Follow the software on-screen instructions to transmit data.
The data transmitted will include results with date and
time. Remove the cable and the device will automatically
turn off.
Note:
• While the meter is in transmission mode, it will be unable
to perform a blood glucose test.
Maintenance
Changing Battery
You must change the battery immediately and reset the date
and time when the battery power is extremely low and "
&
" appears on the screen. The meter cannot be turned
on.
To change the battery, do the following:
1. Press the edge of the battery cover and lift it up to remove
the cover.
2. Remove the old battery and replace with one 1.5V AAA size
alkaline battery.
3. Close the battery cover. If the battery is inserted correctly,
you will hear a "beep" afterwards.
CAUTION RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
Note:
• Replacing the battery does not affect the test results stored
in memory.
• Keep away the battery from small children. If swallowed,
promptly seek medical assistance.
• Battery may leak chemicals if unused for a long time.
Remove the battery if you are not going to use the device
for an extended period.
• Properly dispose of the used battery according to your
local environmental regulations.
EN-12
INSTRUCTIONS.