Channel Function Menu Operation - CRT SS 9900 User Manual

Add/delete scan list
In channel mode, Long press SCAN for over 2 seconds will add
or delete present channel from scan list.
1. When LCD displays " SC", present channel added to scan list.
2. When LCD does not displays "
added to scan list.
Note: This function is equal the operation in Channel data
function No.05 menu.
DW
Dual-Watch function
1. Short press DW to turn on Dual watch, LCD displays "DW";
2. Short press DW again or press PTT to exit DW mode;
Dual-Watch channel setup
1.
2. Hold DW for 2 seconds, LCD displays "DW";
3. Turn Channel switch to choose second dual watch channel.
Long press DW again to store and exit.
EMG
Choose EMG channel:
Short press EMG to use Emergency channel, LCD displays "EMG".
1. Short press EMG once to choose CH9;
2. Short press EMG again to choose CH19;
3. Short press EMG thrice to return to last normal channel.
Keypad Lock Function:
1. Long press EMG to lock keys, LCD displays "
2. Long press EMG again to unlock the keys.
Note: When this function is turned on, only PTT button is valid.
SC", present channel is not
";

CHANNEL FUNCTION MENU OPERATION

1. Press MENU , the top left of LCD display "F", Press PUSH
to enter menu list.
2.
3. Press PUSH to choose the menu.
4. Turn Channel switch to choose wanted value.
5. Press PUSH to return to previous menu, press any other key
or wait 5 seconds, the setting will be stored and exit.
No. Function LCD Display
Busy Channel
Lockout
Offset
Direction
CTCSS/DCS
Values and Descriptions
OFF: Shut busy channel lockout
function;
ON: Open busy channel lockout
function;
Default: OFF.
REP+: Open offset direction
function, TX frequency> RX
frequency;
REP-: Open offset direction function,
RX frequency> TX frequency;
OFF: Shut offset direction function
Default: OFF.
CTCSS: 67.0~250.3Hz, Total 38
groups;
DCS: D023N~D754N, Total 104
groups;
OFF: Shut CTCSS/DCS code
function.
Default: OFF
Note: This function is available only
when install Optional CTC board.
7