gefran KFM05a Instruction Manual page 9

General Safety notes
Electrical Connection
When working on a live drive-converter observe the valid national accident prevention regulations
(e.g. BGV A2).
Electrical installation is to be made according to the relevant regulations (e.g. line cross sections,
fuses, PE-connection). Additional notes are in this technical description.
Compliance with the limit values demanded by the EMC legislation is up to of the manufacturer of
the system or machine. Additional information about shielding, grounding, configuration of filters
and cables is also provided in this technical description.
Operation
Systems or machines with built-in power drive-converters need if necessary additional monitoring
and protective devices in accordance with the valid safety regulations, e.g. law of technical
material, accident prevention regulations etc. Alteration of the drive-converters via user software is
allowed. This technical description is to be considered.
Do not touch live parts of the drive-converter immediately after disconnecting from the mains owing
to charged capacitors. Remove the main unit cover only after disconnecting the drive-converter
from the mains and a waiting period of at least 5 minutes (discharging period of the capacitors). In
the event of malfunctions, the discharging period of 5 minutes may be exceeded substantially.
In addition observe the instruction plates on the drive-converter. During operation hold close all
coverings and doors.
Among other things, guarantee presupposes the considering of this technical description.
Maintenance
Observe the documentation of SIEI-AREG especially concerning maintenance. Further information
is in this technical description.
Keep this safety notes and this documentation in a safe place!
SIEI-AREG GmbH cannot make any guarantees relating to the translation.
! Copyright !
Distribution or reproduction of this documentation or parts of it is restricted to authorized
customers only. The technical details are provided exclusively for servicing purposes.
Duplication is prohibited. All rights reserved. Misuse will be prosecuted!
Art.-No.: 918 111e
SIEI-AREG GmbH
Gottlieb-Daimler-Straße 17/3
74385 Pleidelsheim Germany
Fon: +49 7144 89736 0
Page 9 von 60 Rev. 09/14