Installation Instructions - Vision TM-CAGE Owner's Manual

INSTALLATION INSTRUCTIONS

Note: For the most secure fit the cage should conform as closely as possible to the size
of projector.
1. Set bottom plate on level, non-scratch surface. It doesn't matter which way up it is.
2. Set four foam blocks on each corner of the bottom plate.
3. Carefully put projector onto the foam blocks upside-down.
Note 1: Locate the foam blocks
so they ARE NOT pushing
function buttons on the top
surface of the projector.
Note 2: The foam blocks come
in four thicknesses to allow for
projectors which do not have
a flat top surface. Adjust to
ensure the projector is level.
3