Steps
1. Connect the display cable to the connector on the back of the display panel.
2. For systems that support USI pen, connect the USI pen cable to the connector on the back of the display panel.
3. Adhere the rubber spacer on the display cable.
4. Adhere the conductive tape to secure the display cable to the back of the display panel.
5. Flip the display panel to align it with the display assembly.
6. Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks onto the display
assembly.
Next steps
1. Install the
display
assembly.
2. Install the
base
cover.
3. Follow the procedure in
Front-facing camera
Removing the front-facing camera
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
display
assembly.
4. Remove the
display
panel.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
45