Installing the world-facing camera
Prerequisites
CAUTION:
This is a fragile component. Handle with care.
About this task
NOTE:
The following procedure is applicable only for systems that are shipped with a world-facing camera.
The following image indicates the location of the front-facing camera and provides a visual representation of the installation
procedure.
Steps
1. Insert the world-facing camera module into the slot on the palm-rest assembly.
2. Replace the screw (M2.5x2.5) to secure the world-facing camera module to the palm-rest assembly.
Next steps
1. Install the
world-facing camera
2. Install the
system
board.
3. Install the
base
cover.
4. Follow the procedure in
Display panel
Removing the display panel
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
display
assembly.
About this task
The following images indicate the location of the display panel and provide a visual representation of the removal procedure.
40
Removing and installing components
cable.
After working inside your
Before working inside your
computer.
computer.