Table of Contents
Advertisement
REMOTE CONTROL
Before proceeding with the operation of your new Rinnai panel heater remote controller, please
read these instructions thoroughly and gain a full understanding of the requirements features
NOTE
and operation of your remote controller.
Please keep the Operation and Installation Manual handy so it can be referred to at any time in
conjunction with these instructions.
REMOTE CONTROL BUTTON DESCRIPTIONS & OPERATION
POWER `ON´ / `OFF´ button
1
MODE button, temperature/timer setting
2
`UP´ button
3
`DOWN´ button
4
WIFI button
5
The Rinnai Remote Controller allows for convenient operation of the appliance within a 5 metre range.
A confirmation beep sounds to confirm that a successful controller input has been received by
the appliance.
NOTE
Rinnai
1
ON/OFF
MODE
3
UP
DOWN
5
WIFI
Press "ON/OFF" button to turn "ON" or "OFF" the panel
heater
Press MODE button to choose functions.
Press UP to navigate up
Press DOWN to navigate down
Aim the remote control towards the receiver on the front
of panel heater. Press WIFI button and hold 5 seconds
to active and or resets WiFi module for pairing of panel
heater.
The appliance will respond with a beep and WiFi
indicator flash to confirm WiFi activation or reset.
For further details refer to the WiFi Operation Manual, a
copy of the manual may be downloaded from the Rinnai
web
panel-heaters/
13
ABOUT YOUR ELECTRIC PANEL HEATER
2
4
site:
https://www.rinnai.com.au/heating/electric-
Electric Panel Heater OIM
Advertisement
Table of Contents
