[ VIII Disassembly Procedure ]
2. Thermistor (Intake air)
Exercise caution when removing heavy parts.
1. Remove the control box cover according to the procedure
in section 1.
2. Remove the thermistor.
(1) Pull out the thermistor holder (B) and thermistor (C) on
the control box.
3. Drain pump
Exercise caution when removing heavy parts.
1. Remove the control box cover according to the procedure
in section 1.
2. Remove the drain pump.
(1) Remove the drain pump from connector (E) in control
box.
(2) Remove the cover (a) and the drain pump.
HWE18200
(a)
Fig.3
Fig.4
- 35 -
(B), (C)
GB