Disassembly Procedure; Control Box; Thermistor (Intake Air) - Mitsubishi Electric PEA-M200LA Technical & Service Manual

[ X Disassembly Procedure ]
X Disassembly Procedure

[1] Disassembly Procedure

1. Control box

1. Removing the control box cover
(1) Remove the two fixing screws on the cover (A)
to remove it.

2. Thermistor (Intake air)

1. Remove the control box cover according to the
procedure in section 1.
2. Disconnect the connector (CN20) from the
Indoor controller board.
3. Pull out the thermistor holder (B) and
thermistor (C) on the control box.
HWE20020
Exercise caution when removing heavy parts.
Fig. 1
(B), (C)
Fig. 2
- 37 -
(A)
Indoor controler
board
GB