Table of Contents
Advertisement
Adjusting the Lamp heads
1
Adjusting the lamp heads; Adjust the lamp head direction by moving up and down within a range of 15 degrees. You
may also adjust the light position from side to side to select the required lamp direction.
Note: LED LAMPS ARE NON-REPLACEABLE. Do not attempt to access / maintain the LEDs; they are non replaceable
and any contact may damage the LEDs and will void the warranty.
2
The Motion Sensor Detector
Detection Range: 49.2 ft. / 15 M * 220 degrees on an optimum installation height of 2.5 meters
Note: When you first install your security light, ensure the PIR detector cover the desired area.
7
OPERATION
Adjust the lamp head direction by moving up and
down
Advertisement
Table of Contents
