1. Manuals
  2. Brands
  3. NightWatcher Manuals
  4. Lighting Equipment
  5. NW16TSP
  6. User manual

NightWatcher NW16TSP User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NW16TSP
0345 900 6764
www.nightwatcher.co.uk/support-centre
Protect yourself. Please read these instructions carefully prior to installation and retain them for
future reference.
Failure to follow any of these instructions could void product warranties.
1

Advertisement

Table of Contents
loading

Related Manuals for NightWatcher NW16TSP

Summary of Contents for NightWatcher NW16TSP

  • Page 1 NW16TSP 0345 900 6764 www.nightwatcher.co.uk/support-centre Protect yourself. Please read these instructions carefully prior to installation and retain them for future reference. Failure to follow any of these instructions could void product warranties.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts,  cuts/abrasions and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels. Before installing, servicing or performing routine maintenance upon this equipment, follow these general ...

  • Page 3: Pre-Installation

    PRE-INSTALLATION Before beginning assembly of the product, make sure all parts are present. Compare parts with package contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble the product. Estimated Installation time: 30 minutes. Note: Fixture should be installed by persons with experience in household wiring or by a qualified electrician.
  • Page 4 PRE-INSTALLATION (Continued) FIXTURE PACKING LIST Part Description Quantity Screw Hole Silicon cover M4 X 56mm Center Screw Drywall screw Light Back Cover Plate Plastic Masonry Plug User Manual Mounting Hardware included. Tools Required for Installation (Not included):...

  • Page 5: Installation

    INSTALLATION Step 1. Installing the Mounting Bracket Line up the holes of the light back cover plate D with the holes on your wall. Using  the two Drywall Screws C and fix it tightly in ide the wall using the Plastic Masonry Plug E. WARNING: Risk of electric shock.
  • Page 6 INSTALLATION (Continued) Step 3. Mounting the Light Fixture Install the Light Fixture BODY to the wall Mounting cover Bracket (D) with affixed Center Screws (B).   Cover the hole of the Light Fixture screw hole with (A) the Decorative Silicon Cover . Note: Make sure all the wires are properly connected inside the connection block before attaching the light to the wall.

  • Page 7: Operation

    OPERATION Adjusting the Lamp heads Adjusting the lamp heads; Adjust the lamp head direction by moving up and down within a range of 15 degrees. You may also adjust the light position from side to side to select the required lamp direction. Adjust the lamp head direction by moving up and down Note: LED LAMPS ARE NON-REPLACEABLE.

  • Page 8: Time Setting

    PIR Sensor Adjustment Time Setting: You can set the time span at a minimum of around 5 seconds by turning the TIME setting counter-clockwise or set it at maximum around 7 minutes by turning the TIME setting fully clockwise. The security light will stay on as long as motion is detected and will go off after the time span you set after no motion is detected.

  • Page 9: Specifications

    Manual Override Function: When powered on, the PIR sensor enters a “warm-up” period for about 20 seconds (the red LED sensor indicator will light on), then automatically switches into AUTO MODE. During AUTO MODE, by switching the mains switch OFF – ON – OFF – ON in about 2 seconds, the PIR sensor will automatically change into MANUAL MODE, the lights will remain ON, and with NOT be controlled by time duration or ambient light (LUX) levels, The MANUAL MODE will change to AUTO MODE in 6 hours automatically.

Table of Contents