2. NightWatcher NE400 Motion Light with Video Camera 3. Assembly 4. Installation 5. Programming your NightWatcher NE400 6. Set the date and time of NightWatcher NE400 7. Viewing video 8. Technical Specifications 9. General Information and Safety Contents of packaging ...
NightWatcher NE400 Motion Light with Video Camera overview Fig. 1 Fig. 2 Step 1. Insert/remove SD card (see fig. 3): Unscrew the waterproofed cover using provided Allen key, then insert the SD card until it automatically locks into place.
Page 3
If you are not sure, please contact your retailer. Note: It is recommend to mount NightWatcher NE400 Motion Light with Video Camera 2M above the ground for optimum performance, do not mount the fixture below 1.2M. See below figure for details of performance range.
Page 4
4. Make sure the polarity is correct. Double check the connections after wiring. Errors may damage the motion sensor or cause a fire hazard. 5. Attach the unit to the mounting plate. You will first need to angle the unit back so that the catch at the top of the mounting plate fits into slot on the back of the unit.
Page 5
Step 4. Adjusting the Settings (see fig. 8~10) Time control:Turn the time control knob to”+” side to increase the illumination time (7 minutes max.), turn the control knob to “-“ side to reduce the illumination time (30 seconds min.). ...
The LCD screen will shut off automatically 10 seconds later. * On the ”P” (photo) setting, NightWatcher NE400 will take a series of digital photographs at a rate of 3 photos every second when the motion sensor is triggered.
Put the SD card into a card reader, connect PC and card reader by USB cable (not included) and open any media player to view the video. Fig. 12 Technical Specifications 1. Features and specification: PIR detection angle 160 Deg and detection range up to 10M ...
• After a mains power removal from the NightWatcher NE400. • After removing the SD card for viewing prior to replacing in the NightWatcher NE400. To format the SD card Please ensure to save any required images to an alternative folder prior to formatting.
Page 9
This could cause serious damage to the unit and will void the warranty. This NightWatcher NE400 Motion Light with Video Camera is a precision electronic device. Do not attempt to service this camera yourself, as opening or removing covers may expose you to the danger of electric shock or other risks.