NightWatcher NW16TSP User Manual page 6

Step 3. Mounting the Light Fixture
Install the Light Fixture BODY to the wall Mounting cover Bracket (D) with affixed Center Screws (B).

 Cover the hole of the Light Fixture screw hole with (A) the Decorative Silicon Cover .
Note: Make sure all the wires are properly connected inside the connection block before attaching the light to the
wall.
Step 4. Caulking Around the Light Fixture
Caulking Around the Light Fixture: For additional protection, caulk around the joint between the light fixture and

mounting bracket using a silicon sealant. (not included)
6
INSTALLATION (Continued)