Pre-Installation; Mounting Locations - NightWatcher NW16TSP User Manual

Before beginning assembly of the product, make sure all parts are present. Compare parts with package contents list and
hardware contents. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Installation time: 30 minutes.
Note: Fixture should be installed by persons with experience
in household wiring or by a qualified electrician. The
electrical system and the method of electrically connecting
this fixture to must be in accordance with the National
Electrical Code and local building codes.
 Install the motion sensor 6.5 ft / 1.9 m - 10 ft / 3 m above the
ground. Motion sensor is less sensitive above 10 ft / 3 m.
 Mount motion sensor so motion moves across detection
zone.
 Mount sensor away from heat producing sources to
prevent false triggering. Also be very careful not to
include objects such as windows, white walls and water
in the detection zone.
 Mount fixture away from moving objects such as trees
and street traffic.
 Do not install more than one motion sensor light on one
wall switch.
 Suitable for covered wall or eave mounting.

MOUNTING LOCATIONS

 Determine the mounting location – a wall or under an eave.
 Position the lamphead in the general direction of the
desired light coverage.
Note: Do not mount this light fixture on the ground.
3

PRE-INSTALLATION