Mounting The Clarify Tonearm - Clearaudio Clarify User Manual

User manual / Bedienungsanleitung
3. Mounting the
Pic. 4: Assembling the arm base
Pic. 5: Mounting the tonearm
Pic. 6: Locking the tonearm
Page / Seite 8
Clarify
tonearm
Take the clamping ring and place it on the
recess in the tonearm base.
Now you can attach the clamping ring to the
tonearm base with the 3 supplied M4 x 10
screws.
Make sure that the side hole of the clamping
ring (see Pic. 4) remains accessible.
Insert the tonearm cable first and then the
Clarify
tonearm foot of the
hole of the clamping ring (Pic. 5).
Now fix the tonearm with the screws and the
hex wrench (Pic. 6), do not over-tighten, so
that you can finally adjust it later!
© clearaudio electronic GmbH, 2022-01
tonearm into the