Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for ML Accessories MLRCTM2
Summary of Contents for ML Accessories MLRCTM2
- Page 1 INSTALLATION & MAINTENANCE MANUAL MLRCTM2...
- Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: MLRCTM2 SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
- Page 3 Fig. 1 • Feed the mains cable through the rubber grommet on the rear of the fitting to retain IP rating • Ensuring the pullcord is at the bottom, secure the base to the surface using the screws, washers and wall plugs provided •...
- Page 4 WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL This product contains a light source of energy efficiency class D to Regulation (EU) No 2019/2015. This product contains an LED light source and a control gear which can be replaced by a professional.
- Page 5 If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve...
- Page 6 INTERNAT CONTACT D INTERNATIONAL CONTACT DETAILS ML Accessories Limited LU5 4LT www.mlaccessories.co.uk DCJUL21_V1...
Need help?
Do you have a question about the MLRCTM2 and is the answer not in the manual?
Questions and answers