Table of Contents
Advertisement
Bluetooth® Connectivity > Pairing with a Different Device
3
Select this product from the list on your Bluetooth device.
Select the listing that reads "Yamaha..." and not the listing that reads "LE-Yamaha...".
If a passkey is required when connecting, input "0000".
Yamaha TW-E5B
If successfully connected, you will hear the "Pairing Successful" and "Connected" audio
messages in the earbud that is flashing red and blue. The indicator displays as shown below.
Earbud that is now primary
Earbud (L) and (R) connect automatically and are ready for use.
NOTE
Pairing standby mode will automatically end on this product after about two minutes. To pair again, start from step 1.
(
If the earbuds (L) and (R) do not automatically connect, put them back into the charging case and take them out again.
(
Up to three Bluetooth devices can be registered with this product. If you pair a device beyond the maximum number, the
(
information for device you first paired (the oldest pairing) will be deleted.
This product does not support multi-point connectivity (connection to multiple devices at the same time).
(
Related links
"Pairing for the First Time" (p.17)
(
"Connecting to a Device Already Paired" (p.21)
(
"About the "Headphone Control" app" (p.28)
(
"Using only one of the earbuds" (p.41)
(
Blue
Lights up for 10 sec
20
Advertisement
Table of Contents
