Cold Jet i3 MICROCLEAN 2 Manual page 11

There may be other safety labels or warning signs on the machine that contain additional
information regarding potential safety hazards not explained in this manual. Operators and
maintenance personnel should familiarize themselves with these safety labels and warning signs.
Replace any safety labels or warning signs if they become damaged, missing, or illegible.
Cautions and Warnings
Please review the following cautions and warnings before operating or performing maintenance on
the machine.
CAUTION
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Read the instructions before using the machine. Only qualified personnel
should operate the MicroClean 2.
Ensure adequate ventilation when operating this equipment to prevent the
build-up of carbon dioxide gas. If used indoors or other confined space, a CO
detector should be used to monitor for excessive unsafe levels of CO
provide a suitable warning.
Ensure that expended dry ice media emissions are not in the vicinity of air
ventilation.
High pressure blast streams can be dangerous if subject to misuse. The blast
stream must never be directed at persons, live electrical equipment or the
machine itself.
Do not use the machine within range of persons unless they wear the
personal protective equipment (PPE).
Do not direct the blast stream against yourself or others in order to clean
clothes or foot-wear.
High pressure cleaners shall not be used by children or untrained personnel.
High pressure hoses, fittings and couplings are important for the safety of the
machine. Use only hoses, fittings and couplings recommended by Cold Jet.
To ensure machine safety, use only original spare parts from Cold Jet or
approved by Cold Jet.
The applicator and applicator hose contain electrical connections. Do not
immerse in water.
2
gas, and
2
5