Introduction To App - Philips VideoTracer VTR8202 User Manual

Reminder
1. When the recorder is connected to the APP successfully,
the APP interface will pop up "No Internet access, switch
to other available networks?" Please select "No / Do
not use / Keep connected", etc. The prompt varies with
different mobile phones.
2. When the recorder is connected to the APP, if the
prompt "Unable to connect to the server, please check
your network settings" pops up, please ignore it, because
this is normal. What the mobile phone connected is the
recorder's WIFI.

14. 2 Introduction to APP

1. APP settings
Select "Settings" in the main interface to connection settings,
parameter settings and application statements. The connec-
tion settings can change WIFI and password. Parameter set-
ting and recorder parameter setting include video resolution,
photo size, exposure, synchronization time, software version.
After changing the parameters, the mobile phone sends in-
structions to the recorder and converts it into corresponding
parameters.
64 EN
2. APP screen preview
After connecting the APP, select "Screen preview" in the
main interface to enter the preview interface, and the "WIFI
CAM" character will appear. APP screen preview includes
APP operating video& audio& photo function. The APP
screen preview interface is shown as follows:
APP operating video. After connecting the APP, select "Screen
preview" in the main interface to enter the pre-recording
interface, and the "WIFI CAM" character will appear. Then,