Tt Osd Labels - Sony KDL-26U4000 Service Manual

3-3. TT OSD Labels

(1)
E C S
(4)
D D C
(7)
-
(13)
Key:
1. Panel size configuration. Changed by TT61...TT68.
2. D/A: D is shown when Digital mode is enabled; A is shown when Analogue mode is enabled. Changed by TT53.
3. TT-- Command prompt.
4. ECS/---: ECS enabled/disabled (TT31).
5. CBA/--: CBA is shown when the TV set is in CBA mode (This mode is available from Factory mode TT19). Changed by TT27.
6. Norm/Fact: Normal or Factory mode. Changed by TT19.
7. DDC/---: DDC enabled/disabled. Changed by TT74.
8. 3/2/1/0: 3, 2, 1, or 0 HDMI inputs toggle. Changed by TT73.
9. E/-: E is shown when EDID WP is enabled; - is shown otherwise. Changed by TT33.
10. N/A: Previously used to indicate Monitor, Hotel, or Otrum mode is enabled.
11. C/-: C (Default value) is shown when MSP Auto Carrier Mute function is enabled; - is shown otherwise. Changed by TT57.
12. M/A: M (Default value) is shown when AM sound is demodulated in MSP; A is shown when AFRIC demodulator is used. Changed by
TT72.
13. N/A: Previously used to indicate Clk enabled.
14. T/-: T is shown when digital test is enabled; - is shown otherwise. Changed by TT39.
15. W/-: W is shown when watchdog is enabled; - is shown otherwise. Changed by TT54.
16. C/-: C is shown when chip select is enabled; - is shown instead. This mode is only available in factory mode. Changed by TT58.
17. V/-: V is shown when visual I2C is enabled; - is shown otherwise. Changed by TT59.
18. D/-: D is shown when audio delay is enabled; - is shown otherwise. Changed by TT55.
19. K/-: K is shown when spread spectrum is enabled; - is shown otherwise. Changed by TT94.
20. B/-: B is shown for BRAVIA models; -is shown otherwise. This mode is only available in factory mode. Changed by TT56.
21. T/-: T is shown if temperature algorithm is enabled; - is shown otherwise. Changed by TT52.
22. L/-: L is shown when HDMI log is enabled; - is shown otherwise. Changed by TT34.
23. X/-: X is shown when teletext is centered (Default value); - is shown otherwise. Changed by TT14.
24. B/-: B is shown when SuperBlack algorithm is enabled; - is shown otherwise. Changed by TT51.
25. D/-: D is shown when Panel detection is enabled; - is shown otherwise. Changed by TT21.
26. G/-: G is shown when Gamma correction is enabled; - is shown otherwise. Changed by TT36.
All manuals and user guides at all-guides.com
3 2 D
" (2)
C B A B
(5) (20)
3 E T
(8) (9) (21)
T W C
(14) (15) (16)
- 13 -
T T -
D N o r m
(25)
- C M
(10) (11) (12)
V D K
(17) (18) (19)
-
(3)
(6)
L G
(22) (26)
X B
(23) (24)