Tt Mode - Sony KDL-32S5600 Service Manual

3-3. TT MODE

The TT modes described below are available by selecting the two
relevant digits. You can exit the 'TT Mode' by entering 00, by
pressing the 'Analog' or the 'Digital' button, by switching the TV
set into Stand-by mode, or by Powering the TV set off.
00 'TT' mode off
03 Set volume to 35%
04 Set volume to 50%
05 Set volume to 65%
06 Set volume to 80%
07 Ageing mode on
08 Shipping Condition
09 WB Levels Check
19 Factory toggle mode (ON/OFF)
27 CBA mode toggle (ON/OFF)
31 ECS mode toggle (ON/OFF)
32 Set BCN channels preset
36 Full HD HDMI EDID Write
37 WXGA HDMI EDID Write
41 Re-initialise NVM
43 Select Dual Sound "A"
Select Dual Sound "B"
44
45 Select Dual Sound "Mono"
Select Dual Sound "Stereo"
46
48 Set NVM as non-virgin
Set NVM as virgin
49
59 Stop Main IIC Micro
WXGA /FHD Panel Selection
69
75 Set Centred Balance
76 Set Volume to Max
77 Set Volume to Min
78 Set Balance Full Left
79 Set Balance Full Right
81 Digital BER Display
84 TS CI Path Through
87 Front Panel Button Test
89 LED Test
92 TS CI Path Through With Reed Solomon Off
All manuals and user guides at all-guides.com
- 15 -
Note :
To place the Remote Commander in 'TT Mode' press the
following buttons together for approximately five seconds.
i+ 5
(EXTERNAL INPUT) (ON SCREEN (ON SCREEN (DIGIT 5) (DIGIT 5) (DIGIT 5)
DISPLAY)
DISPLAY)
To use the Remote Commander in 'TT Mode' press the
'Red' text button on the Remote Commander twice.
TT Button
TT will then appear in the bottom right hand corner of the TV.
To take the Remote Commander out of 'TT Mode' press the
same buttons together for approximately five seconds.
+
(VOLUME +) (VOLUME +) (VOLUME +) (TV)