Furuno GP-3500 Operator's Manual page 148

9. CUSTOMIZING YOUR UNIT
AAM: Arrival alarm
APB: Autopilot sentence (XTE, XTE direction, arrival radius, bearing and
destination from origin to destination)
BOD: Bearing origin to destination
BWR: Bearing and distance to waypoint (rhumb line)
BWC: Bearing and distance to waypoint (great circle)
DPT: Depth (only for Version 2.0)
DBT: Depth below transducer (only for Version 1.5)
GGA: GPS fix data (UTC of position, L/L, receiving status,
number of satellite in use, DOP)
GLL: Longitude and latitude
GTD: TD Loran-C
MTW: Water temperature
RMA: Recommended minimum specific Loran-C data
RMB: Recommended minimum navigation information (XTE, direction to steer,
destination waypoint ID, origin waypoint L/L, destination waypoint L/L,
range and bearing between waypoints, range and bearing to destination,
destination closing velocity, arrival alarm)
RMC: Recommended minimum specific GPS/TRANSIT data
VHW: Water speed and heading
VTG: Course over ground and ground speed
WPL: Waypoint location
XTE: Cross-track error, measured
ZDA: Time and date
HDT: Heading true
HDG: Heading, deviation and variation
MWV: Wind speed and angle
TTM: Tracked target message
BAUD RATE
Selects data baud rate among 4800, 9600, 19200 and 38400.
CHARACTER LENGTH
Selects data character length 7 bit or 8 bit.
STOP BIT
Selects stop bit, 1 bit or 2 bit.
PARITY
Selects parity among EVEN, ODD or OFF.
9-36