I/O Port Setup Menu - Furuno GP-3500 Operator's Manual

9. CUSTOMIZING YOUR UNIT
9.7

I/O PORT SETUP Menu

This menu sets up the I/O ports, and should be done at the installation. Note that
the data transfer between this unit and external equipment may be wrong after
changing this menu settings. Be sure to set the ports correctly: Improper setting
may prevent proper transfer of data.
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [5] key to show the I/O PORT SETUP menu.
9-34
0-5. I/O PORT SETUP
NMEA I/O PORT 1
NMEA FORMAT
TLL OUTPUT
L/L FORMAT
OUTPUT DESTINATION 1. ON
SELECT OUTPUT SENTENCE
NMEA I/O PORT 1
NMEA FORMAT
TLL OUTPUT
L/L FORMAT
OUTPUT DESTINATION 1. ON
SELECT OUTPUT SENTENCE
RS232C FORMAT
BAUD RATE
CHARACTER LENGTH
STOP BIT
PARITY
NMEA FORMAT
L/L FORMAT
OUTPUT DESTINATION 1. ON
SELECT OUTPUT SENTENCE
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
I/O port setup menu
1. NMEA0183 Ver 1.5
1. ON 2. OFF
1.DD˚MM.MM' 2.DD˚MM.MMM'
3.DD˚MM.MMMM'
2. OFF
1. ON 2. OFF
1. NMEA0183 Ver 1.5
1. ON 2. OFF
1.DD˚MM.MM' 2.DD˚MM.MMM'
3.DD˚MM.MMMM'
2. OFF
1. ON 2. OFF
1. 4800 2. 9600 3. 19200 4. 38400
1. 7 BIT 2. 8 BIT
1. 1 BIT 2. 2 BITS
1. EVEN 2.ODD 3. OFF
1. NMEA0183 Ver 1.5 2. Ver 2.0
1.DD˚MM.MM' 2.DD˚MM.MMM'
3.DD˚MM.MMMM'
2. OFF
1. ON 2. OFF
2. Ver 2.0
2. Ver 2.0