Navigator Setup Menu - Furuno GP-3500 Operator's Manual

MARK STATUS
Turns the mark data on or off. When ON is selected, the mark data box appears
by placing the cursor on a mark.
OWN SHIP'S MARK
Selects own ship's mark size from among LARGE, SMALL or SHIP.
"SHIP" is selected to indicate the length and width of your vessel, with SHIP'S
LENGTH, SHIP'S WIDTH, ANTENNA POSITION Va and ANTENNA POSITION
Hb below.
SHIP'S LENGTH, SHIP'S WIDTH
Sets the ship's length and width. (See the installation manual.)
ANTENNA POSITION Va, ANTENNA POSITION Hb
Sets the antenna unit position. (See the installation manual.)
9.4

NAVIGATOR SETUP Menu

The NAVIGATOR SETUP menu sets up GPS receiver.
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [2] key to show the NAVIGATOR SETUP menu.
0-2. NAVIGATOR SETUP
SELECT NAV SOURCE
LOCAL TIME (INT GPS)
LOCAL TIME (EXT NAV)
GEODETIC DATUM
POSITION SMOOTHING
SPEED SMOOTHING
SPEED AVERAGING (INT) 060
SPEED AVERAGING (EXT)060
LATITUDE OFFSET
LONGITUDE OFFSET
DISABLE SATELLITE
DEFAULT LATITUDE
DEFAULT LONGITUDE
ANTENNA HEIGHT
GPS FIX MODE
DGPS/WAAS
DGPS/WAAS ALARM
DGPS BEACON STATION 1. AUTO
SELECT FREQUENCY
DGPS BAUD RATE
WAAS SEARCH
CORRECTIONS DATA SET 00
OVERWRITE WAYPOINT 1. DIALOG
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
Navigator setup menu
9. CUSTOMIZING YOUR UNIT
1. INT 2. EXT 3. EXT LORAN-C
4. ALL
+00:00
+00:00
WGS-84
000
000
0.000' N
0.000' E
_ _ _ _ _ _
45˚ 35.000' N
125˚00.000'W
05 m
1. 2D 2. 2D/3D
1. DGPS 2. WAAS 3. AUTO 4. OFF
1. YES 2. NO
2. MANUAL
286.0 kHz
1.50 2. 100 3. 200
1. AUTO 2. MAN 134
2. NO DIALOG
9-17