Remote Controller - Furuno LCD DISPLAY MU-155C Operator's Manual

1.2 Remote Controller

Write the device name (ex. "FCV-1200L") for each "signal" key on the sticker supplied with
the remote controller. Attach the sticker to the remote controller, at the location shown
below.
RGB1 RGB2 DVI
VIDEO1 VIDEO2 VIDEO3
PIP1 PIP2 PIP3
+
BRILL MENU
Remote controller RMC-200
WARNING
Ensure battery polarity is correct.
Wrong polarity may cause the batteries to
explode.
RGB 1 :
RGB2 :
DVI :
VIDEO1:
VIDEO2:
VIDEO3:
Sticker
4