Characteristics; System Operation - golmar Art 4 LITE/G2+ User Manual

MONITOR ART 4

CHARACTERISTICS

- Hands-free monitor.
- 4,3" TFT colour screen
- Monitor with simple installation non-polarised 2 wires
- The ART 4H LITE
apartment and door panel easier.
- ush button P for access and selection of menu function.
- User menu .
- Installer menu .
- Image and communication settings menu
- Output to auxiliary call repeater
- "HZ" input for calls from apartment front door
at the same time (with system and monitors in standby).
- Push buttons for Door release 1 and 2
- Notification l eds.
- Configuration switches

SYSTEM OPERATION

- To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being made
and the door panel LED
a call is being made. At this moment, the apartment's monitors receive the call. If another apartment is called by mistake,
press the button for the correct apartment and the first call will be cancelled.
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists) without the
visitor knowing and icon
press one of the buttons of the monitor to display
panel LED will turn off and the system will become free.
- To establish communication, press
will turn off and the led
hearing aid is between 15 and 25 cm away from the monitor to ensure maximum audio quality during communication
with the door panel.
- Connection will last for 90 seconds or until
pressed . When communication ends,
synthesis is enabled, a 'Communication is finished' message will indicate that the call is over.
- To open door or
1
during the call or communication processes: one press will activate the lock release for
panel LED will also turn on for seconds. If vocal synthesis is enabled, a 'Door
on the door panel.
- Detailed operation of the monitor is described on pp.
COM UNICA M TION WITH HEARING AID
LITE /G2+
(
monitor interacts with hearing aids equipped with T-mode, making conversation between ,
.
(m xim a um 50mA/12V ).
.
.
.
will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating that
displayed on the screen will blink green. To view the image from slave monitors 2 or 3,
the push button below
will turn on . If the monitor is a
door panel
of the door panel press the ,
2
3
bus).
dc
Important:
Up to 6 monitors/ apartments with push button "HZ" activated
the image. If the call is not answered within 45 seconds,
off-the-hook icon
n 'ART 4H LITE'
the push button below
LED will turn off and the system will become free. If vocal
push button below of
6 to 20 .
(ART 4H LITE/G2+
Make sure that the hearing aid is 15-25 cm away from the
monitor to ensure maximum audio quality during
communication with the door
T
shown on the screen. Door panel LED
with icon on the front, make sure that the
on-the-hook icon shown on the
corresponding icon displayed on the screen
3
is open' message will be indicated
MONITOR ONLY
panel, (
3
the door
screen is
seconds and the door
)
see page 4).