Special Codes - golmar Art 4 LITE/G2+ User Manual

MONITOR ART 4

SPECIAL CODES

The enabling of some functions, as well as the modification of some factory parameters, can be carried out by entering
special codes. To do so, the installer menu must be accessed from the monitor. Go to the 'About' screen in the
Settings menu (p. ) and press five times on button 7
The 'special codes' screen will then be displayed. Press the button below icon
press the buttons below icons
below icon to validate it. If the code entered is valid, icon
Press the button below icon
LITE /G2+
Press 5 times
/ to enter the desired code. Once the code has been entered, press the button
to return to the 'About' screen.
'Special codes' screen
of the monitor.
'About' screen
0 01 M /
FW 1.02
will be displayed; if it is not, icon
0 4 4 1
to select the field to be modified and
will be shown.
Continued overleaf
21