Technical Data; Definitions: Safety Guidelines - DeWalt XR LI-ION DCS571 Original Instructions Manual

English
115 mm CIRCULAR SAW
DCS571
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No-load speed
Blade diameter
Maximum depth of cut
Blade bore
Bevel angle adjustment
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-5:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
4
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
115 mm Circular Saw
DCS571
DCS571
V 18
DC
D WALT declares that these products described under
e
1
Technical Data are in compliance with:
Li-Ion
2006/42/EC, EN62841‑1:2015, EN62841‑2‑5:2014.
These products also comply with Directive 2014/30/EU and
min 4500
-1
2011/65/EU. For more information, please contact D
mm 115
the following address or refer to the back of the manual.
mm 39.5
The undersigned is responsible for compilation of the technical
mm 9.5
file and makes this declaration on behalf of D
0°–45°
kg 2.5
Markus Rompel
Vice‑President Engineering, PTE‑Europe
dB(A) 91
D WALT, Richard‑Klinger‑Straße 11,
e
dB(A) 102
D‑65510, Idstein, Germany
dB(A) 3
25.10.2019
m/s 2 < 2.5
m/s 2 1.5

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.





Autogoods "130"
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at
e
WALT.
e