English 115 mm CIRCULAR SAW DCS571 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data...
English Batteries Chargers/Charge Times (Minutes) Weight (kg) DCB104 DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119 Cat # DCB181 0.35 DCB182 0.61 60/40** 60/40** DCB183/B 0.40 DCB184/B 0.62 75/50** 75/50** DCB185 0.35 DCB187 0.54 DCB189 0.54 *Date code 201811475B or later **Date code 201536 or later GENERAL POWER TOOL SAFETY WARNINGS f ) If operating a power tool in a damp location is...
Page 8
English will do the job better and safer at the rate for which it unpredictable behaviour resulting in fire, explosion or risk was designed. of injury. f ) Do not expose a battery pack or tool to fire or b ) Do not use the power tool if the switch does not turn excessive temperature. Exposure to fire or temperature it on and off. Any power tool that cannot be controlled above 130 °C may cause explosion.
English FURTHER SAFETY INSTRUCTIONS FOR SAFETY INSTRUCTIONS FOR SAWS WITH A ALL SAWS PENDULUM BLADE GUARD Kickback Causes and Related Warnings Lower Guard Function • Kickback is a sudden reaction to a pinched, jammed or a ) Check the lower guard for proper closing before each use.
English • Impairment of hearing. CAUTION: Children should be supervised to ensure that they do not play with the appliance. • Risk of personal injury due to flying particles. NOTICE: Under certain conditions, with the charger • Risk of burns due to accessories becoming hot plugged into the power supply, the exposed charging during operation.
English Wall Mounting use it on any other voltage. This does not apply to the vehicular charger. These chargers are designed to be wall mountable or to sit upright on a table or work surface. If wall mounting, locate the Charging a Battery (Fig. B) charger within reach of an electrical outlet, and away from a 1.
English • Contents of opened battery cells may cause respiratory the latest regulations for packaging, labeling/marking and irritation. Provide fresh air. If symptoms persists, seek documentation requirements. medical attention. The information provided in this section of the manual is WARNING: Burn hazard. Battery liquid may be flammable provided in good faith and believed to be accurate at the time if exposed to spark or flame.
Page 13
Description (Fig. A) Battery Type WARNING: Never modify the power tool or any part of The DCS571 operates on a 18 volt battery pack. it. Damage or personal injury could result. These battery packs may be used: DCB181, DCB182, DCB183, Trigger switch lock‑off Lower blade guard DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189.
Page 14
3. Tighten the rip fence guide locking screw securely. 27 Use the supplied rip guide only with the DCS571 circular WARNING: This tool has no provision to lock the trigger saw. Use of this rip guide with other saws may increase the risk switch in the ON position and should never be locked ON of kickback and injury.
English Blades Proper Hand Position (Fig. H) WARNING: To minimize the risk of eye injury, always WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown. use eye protection. Carbide is a hard but brittle material. Foreign objects in the workpiece such as wire or WARNING: To reduce the risk of serious personal nails can cause tips to crack or break. Only operate saw injury, ALWAYS hold securely in anticipation of a...
English To Attach the Dust Bag (Fig. K) 1. While holding the saw, fit the dust bag collar to the dust 26 extraction port 24 as shown in Figure K. Cleaning 2. Turn the collar 26 clockwise to lock the dust bag 25 WARNING: Blow dirt and dust out of the main housing in place.
Page 20
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)