Copying Documents - Fujitsu C150-E140-03EN Operation Manual

3.4 Copying Documents

This section explains how to copy documents.
1) Make sure that the powers of the personal computer, printer, and
2) Check the the document condition.
3) Before setting documents, sufficiently loosen them.
4) Set the documents on the document support.
M3091DC Image Scanner Operation Guide
scanner are ON.
For details, see Section 3.2.1, "Confirming Document Condition."
For details, see Section 3.2.2, "Setting Documents."
Estimate the number of pages to be set based on the following
standard:
The document thickness must be 4 mm or less (50 sheets by
55 kg/ream (64 g/cm
Level the end of the documents to be set.
For details, see Section 3.2.2, "Setting Documents."
Set the documents as described below:
For single-side reading: Place the reading side facing down
(document support surface).
For double-sided reading: Place the surface (first page)
facing down (document support surface).
Insert the documents in the automatic document feeder until they
softly touch the back of the automatic document feeder.
Excessively strong insertion results in feeding multiple pages
simultaneously. Also, make sure that the ends of the pages are not
folded down.
2
) paper) for A4 or legal size or smaller.
3-9