Selecting Input Mode - Fujitsu Plasmavision PDS4213 User Manual

SELECTING INPUT MODE

VIDEO INPUT MODE
VIDEO
MENU
VOL
ENTER
SHIFT
1
2
3
4
* You can also use the
switches on the display's
control panel to accomplish
these steps.
RGB INPUT MODE
VIDEO
MENU
VOL
ENTER
SHIFT
1
2
3
4
* You can also use the
switches on the display's
control panel to accomplish
these steps.
Press to select a desired
1
input mode.
Each time you press
appears. The sequence is as follows:
Video S-video
Video: Displays images from equipment
connected to the Video terminal.
S-video: Displays images from equipment
connected to the S-video terminal.
Comp.video: Displays images from equipment
connected to the component video
input terminal.
* You can switch between video input modes
while you are in RGB input mode.
Press to select a desired
1
input mode.
Each time you press
appears as follows:
RGB1 RGB2
RGB1: Displays images from equipment
connected to the RGB1 (mD-sub)
terminal.
RGB2: Displays images from equipment
connected to the RGB2 (BNC x 5)
terminal.
* You can switch between RGB input modes
while you are in a video input mode.
, a different input mode
Comp.video
S-video mode
Comp.video mode
, a different input mode
RGB1 mode
RGB2 mode
Ｓ−ｖｉｄｅｏ
Ｃｏｍｐ．ｖｉｄｅｏ
ＲＧＢ１
ＲＧＢ２
E-17