Setting Instructions - CONCORD AUTOMATIC CHRONOGRAPH 3 Instruction Manual

SETTING INSTRUCTIONS

Setting sequence:
Moon phase > Day of the week > Date > Time
1. Pull the crown out to position I; the watch will stop.
2. Turn the crown clockwise until a full moon image appears at the top of
the moon phase sub-dial.
3. Continue turning the crown clockwise until the hands 1 and 2 indicate
06:00.
4. To use quick correction, press the push-button B to set the hand in the
sub-dial 6 to the date of the last full moon; see the moon phase table.
5. In quick correction mode, press push-button A to set the hand in the sub-
dial 3 to the day of the week.
6. Continue turning the crown clockwise to move the hour and minute
hands forward until the hand in the sub-dial 6 indicates the current date.
7. Continue turning the crown clockwise until the hands 1 and 2 indicate
the desired time, making sure to take into account the time of day
(morning/afternoon).
8. Push the crown back into position 0; the watch will restart.
QUARZ MOONPHASE 24