Putting The Ac 3 Into Operation; Preparing The Ac 3 For Use - Sennheiser AC 3 Instruction Manual

Putting the AC 3 into operation

Fastening the
stacking elements
Putting the AC 3 into operation

Preparing the AC 3 for use

Setting up the AC 3 on a flat surface
Place the AC 3 on a flat, horizontal surface.
The stacking elements (see "Accessories" on page 15)
are designed to help protect the operating elements
from damage or deformation, e.g. if the AC 3 is
dropped.
Fasten the stacking elements even if you do not
want to stack your AC 3.
Do not fasten the stacking elements when mounting
the AC 3 into a 19" rack (see page 9).
To fasten the stacking elements ¾:
Unscrew and remove the two recessed head screws (M4x8)
on each side of the AC 3.
Secure the stacking elements
using the previously removed recessed head screws (see
diagram).
¾
to the sides of the AC 3
AC 3 | 7