Operating Controls - Sennheiser AC 3 Instruction Manual

The AC 3 active transmitter combiner

Operating controls

³ STANDBY
button
·
Operation indicator
»
4 status LEDs
– light up if the supply voltage for the transmitter is avai-
lable at the BNC sockets
– go off if the BNC sockets
circuited or if transmitters are connected that are not of
the ew G3 series (e.g. transmitters of the ew G2 series)
¿
Cable grip for cable of table top power supply
´ DC IN
socket
for connection of NT 3-1 table top power supply
²
4 BNC sockets RF IN 1
RF inputs for connection of the transmitters
Each of these RF inputs can power one transmitter.
¶
Air vents
º
BNC socket RF OUT
for connecting the transmitting antenna
RF IN 1 to RF IN 4
RF IN 1 to
to RF IN 4
RF IN 4 are short-
AC 3 | 5