Heat Exchanger - Mitsubishi Electric CITY MULTI PEFY Series Technical & Service Manual

[ VIII Disassembly Procedure ]

4. Heat exchanger

Be careful on removing heavy parts.
OPERATING PROCEDURE
1. Removing the heat exchanger.
(1) Remove the heat exchanger cover with procedure [1]-3-1.
(2) Remove the bottom plate which is air outlet side.
(fixing screws: twelve) (Fig. 1)
(3) Remove the drainpan. (Fig. 2)
(4) Remove the cover (A), (B).
(fixing screws: two x 2) (Fig. 3)
HWE1706A
Fig. 1
Fig. 2
Fig. 3
Cover (A)
Fixing screws
- 26 -
FIGURES
Bottom plate
Drainpan
Cover (B)
Fixing
screws
GB