Heat Exchanger - Mitsubishi Electric PEFY-P25VMA-E Technical & Service Manual

[ VIII Disassembly Procedure ]

6. Heat exchanger

Exercise caution when removing heavy parts.
1. Remove the drain pan according to the procedure in section
[1].
2. Remove the heat exchanger cover according to the proce-
dure in section [4] 2.
3. Removing the cover
(1) Remove the five fixing screws on the cover (K) to remove it.
4. Removing the Heat exchanger
(1) Remove the fixing screws on the heat exchanger (M) to re-
move it.
HWE08120
Fig.12
(K) Pipe support plate
Fig.13
- 28 -
(K)
(M)
GB