Table of Contents
Advertisement
6.
Plug the power cord into the power brick, and then plug the power brick into the back of the
Verity Scan (flat side up).
IMPORTANT: Do not plug the power cord into the wall yet.
7.
Log the yellow beaded seal number on your Security Log -
AM. Open the Verity Scan case and lock the lid brace in
place.
IMPORTANT: Never tilt a device up by the handle while
cords are connected – this can damage the cord where
it connects to the device, or cause damage to the
device itself.
8.
Unlock (A), unlatch (B), and remove (C) the tablet.
A
A: Remove blue key from the voting equipment manuals and supplies bag. Use the blue key to
unlock the tablet from its cradle.
B
C
9
Advertisement
Table of Contents
