Table of Contents
Advertisement
9.
Log the red CFAST seal number on the Security Log - AM. Seat the tablet in the cradle (A), tilt
it back (B), and lock it in place (C).
A.
10.
Log the red wire seal number found on the white
panel box (located to the right side of the cradle) on
the Security Log - AM.
11.
on the power brick when AC power is present.
12.
Press the
RED
button on the back of the Verity Scan to power it on.
Note: During the power on process, a Power-On Self Test report will print
on Verity Scan's built-in printer. This report will indicate any hardware or
connection issues; if any issues are noted, check connections and restart the
device using the
RED
B.
Plug the power cord into AC power. A green light should illuminate
power button.
C.
10
Advertisement
Table of Contents
