Table of Contents
Advertisement
Verity Scan orientation
When powered up for the first time the device is used during
a voting event, Verity Scan should display the Print Zero
Report screen.
NOTE: If you are
multiple - day voting event, then you will not print a Zero report.
In addition to the date and time, the following appears at the bottom of the screen:
•
Ballots: The number of ballots scanned and cast on the Verity Scan for the current election; at
the start of a voting event, this number should be zero.
•
Sheets: The number of ballot sheets scanned on the Verity Scan for the current election; at the
start of a voting event, this number should be zero.
•
Lifetime: The number of ballots cast on the Verity Scan for the lifetime of the device (for all
elections).
•
AC and battery power indicators: A green battery icon indicates the battery is connected; a
green plug icon indicates AC power is connected. Specific battery power level can be found on
the Touch Writer Power-On Self Test report.
NOTE: If AC power is not available, the device will automatically switch over to battery power, and a
warning message will display. To dismiss the message and continue operating on battery power, touch "If
the power is out, touch here to use battery". If a voting session is in progress, this message will not appear
until the session is completed.
When battery power is low, and AC power is disconnected, a warning message will appear on the device
screen. Reconnect the device to AC power.
reopening polls during subsequent days
of a
11
Advertisement
Table of Contents
