Table of Contents
Advertisement
opening polls
1.
Set up and power on the Verity Scan.
2.
Select Print Zero Report.
NOTE: If you are reopening polls during subsequent days of a multiple-
day voting event, then you will not print a Zero report.
3.
Wait while the Zero report prints (on the built-in report printer). Using the Zero report, check
the following:
•
Verify the ballot count total on the Zero report is ZERO and enter it in the Reconciliation Log.
•
Verify that the polling place on the report is correct.
IMPORTANT: If these items are incorrect, contact your elections office.
4.
Verify that the clock in the bottom left corner of the screen displays the correct time.
IMPORTANT: If the clock is incorrect, contact your elections office.
Confirm that you are running on AC
13
power.
Advertisement
Table of Contents
