Cleaning; Lcd Message Center; Work Surface; General Workstation Cleaning Instructions - Enovate Medical Encore EcoFlex Manual

ENCORE ECOFLEX MANUAL

CLEANING

LCD MESSAGE CENTER

The Encore LCD message center may be cleaned with a soft cloth or tissue dampened with water (or
a mild detergent-water solution). If a detergent solution is used, rinse with a clean tissue dampened
with water only. CAUTION: The Encore LCD message center is not watertight. Do not use abrasive
wipes or tissues on the LCD message center – abrasive wipes may scratch the window. Never use
solvents on the window – solvents may damage the finish or window.

WORK SURFACE

All configurations of Encore workstations utilize an external plastic covering that is designed to resist
the effects of harsh chemicals in a health care environment.

GENERAL WORKSTATION CLEANING INSTRUCTIONS

Nonabrasive cleaners or mild cleaning solutions should be used. As a precaution, we recommend
testing the suitability of a cleaning product by applying to an inconspicuous area, minimizing the time
of exposure and the amount of cleaning agent used (dilute as recommended by the supplier) to pre-
vent any damage to the surface.

TESTED AND APPROVED CLEANING AGENTS

• Quaternary ammonium compound
• Bleach Solution (generic)
• *Alcohol Solution (91% isopropyl: Avoid Use on Base)
• Hydrogen Peroxide
• Sani-Cloth® Plus Wipes
• Super Sani-Cloth® Wipes
• Contamination by intensely colored substances such as: coffee, iodine, or dyes, must be removed
immediately.
• Power System should be inspected bi-annually to ensure vent holes and pan guard are free of
dust and debris.
• All paints and plastic cart components will withstand cleaning by most commonly used diluted
non- abrasive solutions such as: quaternary ammonia compounds, or bleach.
34
Cleaning