Electrical System - Husqvarna R 214 2021 Workshop Manual

7. Put the spark plug back in and turn it by hand until it
touches the spark plug seat.
8. Tighten the spark plug with the spark plug wrench
until the washer is compressed.
9. Tighten a used spark plug ⅛ of a turn more, and a
new spark plug ¼ turn more.
CAUTION: Spark plugs that are not
tightened correctly can cause damage to the
engine.

9.3 Electrical system

9.3.1 Electrical system overview
1. Battery
2. Main fuse
3. Operator presence control (OPC)
4. Microswitch, parking brake
5. Safety switch for the lift lever
6. Ignition lock
7. Hour meter
1592 - 003 - 05.01.2022
7
6
5
10. Replace the ignition cable shoe.
CAUTION: Do not try to start the engine if
the spark plug or ignition cable is removed.
1
2
3
9.3.2 To replace the main fuse
A blown fuse is identified by a burned connector.
1. Open the engine cover. The main fuse is in a holder
in front of the battery.
2. Pull the fuse from the holder.
4
Repair instructions - 27