Initial Operation; Setting The Display Language - Kubota U50-5 Operating Instructions Manual

Initial operation

Before initial operation, the machine must first be checked visually for external transit damages and checked if the
shipped equipment is complete as ordered.
Check fluid levels as described in the "Maintenance" section (page 171).

For a description of all operation features refer to the "Operating the machine" section (page 83) as well as

the following sections.
If failures are detected, please inform your dealer immediately.

Setting the display language

Messages in the display can be shown in 11 languages.
Turn the starter switch to the RUN position.

Press menu switch on dial switch.

The menu bar appears in the display.
Rotate jog dial to the right until "Various settings" is selected in

the display.
Press Jog dial (enter switch).

The Various settings appears in the display. 
("Languages" is selected.)
Press Jog dial (enter switch).

76
Operation
W9272-8135-1
05/2020