Related Manuals for Richter Optica S6-CL
Summary of Contents for Richter Optica S6-CL
- Page 1 Richter Optica info@richter-optica.com Instructions for: S6-CL, S6-BL, S6-TS, S6-SPS, S6-RLT Models...
- Page 2 Track Stand Zoom Knob Diopter adjustable Zoom Knob eyepieces Focusing Knob Magnification locking screw Intensity control switches LED Lights Glass Stage Plate S6-CL S6T-BL Stage Clips Auxiliary Lens Focusing Knob Attachment Intensity control switches LED Lights Stage Clips S6-RLT Trinocular port...
- Page 3 Thank you for your purchase of a Richter Optica microscope. The information in this manual is provided to answer most questions that can arise when operating your microscope and to help you avoid unnecessary maintenance expenses in the future. Please carefully read instructions before operating microscope. Nomenclature used to describe components and controls are identified on opposite page.
-
Page 4: Operation
OPERATION 1. Illumination (only for models with built in illumination) a. Before operating the microscope, adjust the intensity controls located on each side of the base to the minimum position. This should be done prior to each time light is turned on or off. - Page 5 Focusing Continued: e. On mounted post models, the height of the viewing head can be adjusted up or down on the post in order to focus on different sized objects. Loosen the locking knob located on the locking support collar, allowing the support collar to slide down to bottom of post. While firmly holding focusing holder containing viewing head with one hand, loosen locking knob located on back of focusing holder so that head can move freely up or down on post.
-
Page 6: Maintenance
MAINTENANCE WARNING: For your own safety, turn switch off and remove plug from power source before maintaining your microscope. If the power cord is worn, cut or damaged in any way, have it replaced immediately to avoid shock or fire hazard. 1. -
Page 7: Possible Cause
TROUBLESHOOTING: Optical PROBLEM POSSIBLE CAUSE Dust or dirt on objective, illuminator or Dust or dirt in field of view. eyepiece. Interpupillary distance is not set correctly. Double Image Diopter adjustment not set on eyepieces. Two different eyepieces are being used. Diopter adjustment is not set properly on eyepieces. - Page 8 EYEPIECE RETICLE INSTALLATION The Richter Optica S6 stereo microscope widefield high-eyepoint 10x and 15x eyepieces both accept a 24mm diameter reticle. To install the reticle: 1. Remove the eyepiece from the eyetube and turn the eyepiece upside down. 2. Twist out and remove the threaded retaining ring from the bottom of the eyepiece.
- Page 9 S6 STEREO MICROSCOPE MAGNIFICATION The Richter Optica S6 stereo microscope can achieve different magnifications based on the eyepieces and auxiliary lenses used. Refer to the chart below in order to select the proper eyepiece and auxiliary lens accessories to meet your needs.