Page 1
Richter Optica info@richter-optica.com Instructions for Model: S2 Dual Power Stereo Microscopes...
Page 2
Digital Camera Eyepieces C-Mount Adapter Post Diopter Adjustment Objective Lens LED Ring Light Post Locking Clamp Focus Knob (both sides) Locking Screw Base Stage Clips Beam Splitter C-Mount Adapter Black/White Stage Plate Objective Turret 1x / 3x Objectives Focusing Knob Light Intensity Controls for Upper &...
Page 3
Thank you for your purchase of a Richter Optica microscope. The information in this manual is provided to answer most questions that can arise when operating your microscope and to help you avoid unneccesary maintenance expenses in the future. Please carefully read instructions before operating microscope. Nomenclature used to describe components and controls are identi ed on opposite page.
Turn objective turret until smaller number (lowest magni cation) is facing towards you (away from silver post), making certain that the turret “clicks” into indexed position. Magni cation is determined by multiplying the number on the eyepieces by the number on the objective turret.
Prior to cleaning any lens surface, brush dust or lint o lens surface using a camel hair brush. You can also use an ear syringe or canned compressed air, such as that sold by most computer stores. To clean eyepiece lenses, do not remove from eyepiece tube. Clean only the outer lens surface.