Operation; Remote Navigation - Dometic Go Power! C Series User Manual

4.1 REMOTE NAVIGATION

INVERTER
ON/OFF
CHARGER
ON/OFF
1. Press the Inverter ON/OFF button to turn the Inverter on, which then automatically powers the remote up. The remote will take
up to 10 seconds to go to the default home screen which is DC Status in the unit readings sub menu. As shown above.
INVERTER
ON/OFF
CHARGER
ON/OFF
"MENU DOWN"
INVERTER
ON/OFF
CHARGER
ON/OFF
"MENU DOWN"
2. To navigate through the 4 different sub menus, press the down menu select button once to move the arrow to unit setup, twice
to get to remote settings, 3 times for shore power and 4 clicks returns you back to unit readings.
3. To enter any of the sub menus, press the ENTER / SET button. To exit any of the sub menus, press the BACK button.
[page 16] | gpelectric.com
®
Go Power !
SHORE POWER
Initializing...
UNIT READINGS
UNIT SETUP
REMOTE SETTINGS
ENTER / SET BACK
®
DC Status
SHORE POWER
11.68 V
UNIT READINGS
0.0 A
UNIT SETUP
REMOTE SETTINGS
ENTER / SET BACK
®
DC Status
SHORE POWER
11.68 V
UNIT READINGS
0.0 A
UNIT SETUP
REMOTE SETTINGS
ENTER / SET BACK

4. OPERATION

"DEFAULT HOME SCREEN"
INVERTER
DC Status
ON/OFF
11.68 V
0.0 A
CHARGER
ON/OFF
ENTER / SET
INVERTER DC Status
ON/OFF
11.68 V
0.0 A
CHARGER
ON/OFF
"MENU DOWN"
ENTER / SET
INVERTER DC Status
ON/OFF
11.68 V
0.0 A
CHARGER
ON/OFF
"MENU DOWN"
ENTER / SET
®
SHORE POWER
UNIT READINGS
UNIT SETUP
REMOTE SETTINGS
BACK
®
SHORE POWER
UNIT READINGS
UNIT SETUP
REMOTE SETTINGS
BACK
®
SHORE POWER
UNIT READINGS
UNIT SETUP
REMOTE SETTINGS
BACK