3.2 UNIT DIMENSIONS
INVERTER
ON/OFF
CHARGER
ON/OFF
3.3 MOUNTING REQUIREMENTS
The GP-ICR-50 control must be installed in a location that is clean dry and protected. Make sure the LCD screen is visible and access
to the menu navigation buttons is clear and un-obstructed. Always check for hidden electrical wires, pipes and cables before drilling,
cutting or screwing into walls / cabinets.
3.4 INSTALLATION TOOLS
a. Screwdriver (Phillips)
b. Keyhole saw
c.
Pencil or marker
d. Electric hand drill and drill bits
e. Zip ties
[page 14] | gpelectric.com
4.7"
(120mm)
5.9"
(149mm)
5.2"
(133mm)
SHORE POWER
UNIT READINGS
UNIT SETUP
REMOTE SETTINGS
ENTER / SET
BACK
®
INSTALLATION
1.22"
(31mm)